How To Repair Peanut Shelling Machine?

Peanut shelling machine is mainly used for shelling peanuts. After a period of use, the new belt lengthens and relaxes under tension. Therefore, you need to check the tightness of each drive belt and whether the clearance between the coordination parts is properly and regularly adjusted. During operation, always pay attention to the speed, sound and temperature of the machine. Each time you finish a species or a day's work, you should stop the machine, check each bearing for overheating, tighten the screws, and loosen key knuckles in each section. You need to tighten it at any time if it is loose. After each operation, you need to clean the bottom of the screen, which is the hole in the fairing flaps of the wire brush regularly. After the processing season, a major inspection of the machine is carried out. Check the bearing operation and wear; the bottom of the screen is there deformation or cracks; separation of the wear and tear of the screen. After inspection, repair the damaged parts and remove dirt and peanut debris from the machine. After using the peanut sheller, remove the belt and place the machine in a dry warehouse. Remove the belt should not be hanging in the inner wall, exposed to the sun.

 

In addition, peanuts into the peanut shelling machine feeding should be uniform. It is forbidden to mix iron, stone and other debris into peanuts to prevent mechanical accident and damage of peanut shelling machine.

 

For a long time, we have been committed to the peanut machinery production and technical research. Our products include: peanut shelling machine, peanut screening machine, peanut peeling machine, peanut baking machine, peanut butter grinder, peanut wrapper and fried peanut production line and other ancillary equipment.