The problem of castor threshing machine due to speed
- Blog
- August-03,17
- Cara
- 181 Clicks
Speed can be said to be a dynamic, fuzzy concept, but this also on our actual use of
castor shelling machine has a great impact, the speed is too large or too small will bring us some problems, for this need Our constant attention.
1, before the hopper under the drum from the ground too close, resulting in large angle scraping scraping.
2, the belt is too loose, adjust the drum to the big belt to re-install.
3, the clutch is too loose, you can clutch the U-shaped card out of a few loose silk can be resolved.
4, chain: two sprockets do not match, the chain is too loose.
5, large belt deviation: adjust the front of the hopper below the two sides of the drum screw, with the deviation, adjust the left side of the trough left.
6, castor thresher does not turn: clutch too loose, adjust the clutch lever, so that the clutch tight.
When we use the castor thresher, we have to consider the use of speed on the issue, the speed of the problem to ensure that our production, use can be better.
